Data Loggers

MadgeTech's voltage data loggers are ideal for use in determining possible locations for solar panels.

The Volt101 is a single channel low level DC voltage data logger that can be purchased in an extended battery version called Volt110.

The Volt series can be interfaced with solar cells to determine voltage output over time. Thin film solar cells are recommended due to their ease of use and portability. By using the Waterbox110C the device is protected from environmental conditions and can be placed in remote locations for long periods of time.

To profile potential wind turbine locations MadgeTech's Wind110 is a wind data logger, designed to monitor and record the wind speed in all environments. The system includes, a 3-cup anemometer with a sensor connection cable, a Wind110 data logger within a waterproof enclosure, an IFC110 interface cable, and the MadgeTech standard data logger software.

The Wind110-200 is a variation of the Wind110, which includes an IFC200 (USB Interface cable), rather than the IFC110.

The Wind110 is offered with a 25'. 50' 100' or 150' cable.

MadgeTech's pressure and vibration data loggers are ideal for use in hydroelectric power applications.

To monitor pressure events that SCADA systems cannot capture, the PRTrans1000 is the data logger to use. The device samples at 100Hz and takes readings to memory when the user selectable trigger settings are exceeded. It can screw directly into a 1/4" female fitting in pipelines to measure the internal pressure. It is ideal for monitoring penstocks for overpressure in the case of wicket gates suddenly closing. The PRTrans1000 will record to memory pre and post trigger pressure data of the event for later analysis.

The SVR101 is a spectral vibration data logger that records time-tagged 3-acis vibrations and peaks. It computes real-time spectral vibration data using an FFT (Fast Fourier Transform) from 0 to 128 Hertx. To make efficient use of memory, the SVR101 only takes data readings when the (user preset) trigger level is exceeded. The SVR101 is available in ±5G and ±50G ranges.

MadgeTech manufacturer's a wide range of pressure data loggers for the geothermal industry. The data loggers are a direct replacement for strip chart recorders and are powered by batteries which alleviate the need to provide external power sources at the measurement locations. Each device can be calibrated and is traceable to N.I.S.T, which can be used to validate pressure lines.

The PRTemp1000 is a pressure and temperature data logger with a rugged stainless stell enclosure. It is built for use in harsh environments and has a 1/4" NPT fitting for easy connection. The BTIF1000 is an accessory which adds Bluetooth wireless capabilities to the PRTemp1000 data logger. The BTIF1000 enables wireless downloading, stopping and starting of the PRTemp1000.

The PRTemp1000D is a differential pressure data logger, equipped with dial 1/4" NPT connections.

The PR2000 is a pressure logger with an LCD display. It is ideal for applications requiring precise displayed pressure readings, and with an IP65 rating, it is suitable for outdoor use. The device comes equipped with on-screen real-time graphing, an enhancement that helps to quickly visualize data trends.