MadgeTech, the leader in data logger technology, offer a large number of data logging tools to assist in complying with EPA regulations and National Primary Drinking Water regulations.
Autoclave Validation
MadgeTech has developed products such as the HiTemp150 and HiTemp150FP, exclusively for validating temperatures in autoclaves. These data loggers can measure and withstand temperatures as high as 150oC (302oF). The devices record measurements at user specified intervals, validating the entire cycle.
State and Federal regulations mandate records for each autoclave cycle test, the MadgeTech software makes it simple to maintain the required records to validate the entire autoclave cycle test. Our software also offers calculations on MKT, Min/Max, Sterilization, Pasteurization, and Standard deviation.
Standard autoclave cycle:
- 250 degrees F (121 C), at 15 PSI, for a minimum of 60 minutes
- Record data at 2 minute intervals
- Each autoclave must have a permanent record of all cycles
- Each autoclave should have a daily log book
Click here to view range
Monitoring Water Levels and Temperature
The MadgeTech Level1000 and Level2000 accurately monitor and record water level and temperature over time in harsh, difficult environments, assisting in compliance with standards set by the Environmental Protection Agency and National Primary Drinking Water Regulations.
Click here to view range