 |
|
|
|
TREX-8
|
|
Remote Sensor Measurement Range
|
|
-40°C ~ +99°C (-40°F ~ +210°F)
|
Recorder operating temperature range
|
|
-40°C ~ +85°C (-40°F ~ +185°F)
|
|
|
|
< 0.1°C for -40°C ~ +40°C,
< 0.2°C for +40°C ~+80°C
|
|
|
|
With recorder case sitting in environmental temperature between 0°C ~ 50°C the rated accuracy is :-±0.5°C for -10°C~ +40°C
better than ±0.7°C for -10°C~ -30°C & +40°C~+60°C
better than ±0.8°C for -30°C~ -40°C & +60°C~+80°C
better than ±1.0°C for +80°C~+99°C
|
|
|
|
8032 readings (16K bytes memory)
|
|
|
|
adjustable, 30 sec to several hours
|
|
Logging start options
|
|
Push button start or specific date & time.
|
|
|
|
Flashing 'OK' indicator flashing 'Alert' indicator.
|
|
|
|
Typically with full memory (8000 readings) in less than 5 secs depending on computer or readout device used.
|
|
|
|
IP61
|
|
|
|
3V Lithium battery
|
|
|
|
2 ~ 3 years of normal use (based on 15 minute logging, download data monthly.
|
|
|
|
86mm(H)x54.5mm(W)x8.6mm(T)
|
|
|
|
35g
|
|
|
|
Polycarbonate
|
Standard remote sensor cable lengths
|
|
Standard: 1.5m (4’11”)
Extended: 3 m (9’10”) (recommended maximum)
|
|
Remote Sensor Cable Type
|
|
PTFE (FDA food contact rated) coaxial
|
|
|
|
• Optional clearing of alert indication by push button (places inspection make at same time).
• Download inspection mark recorded in LogTag memory every time LogTag is downloaded.
• 'Prestart' fail-safe logging (records temperature data even if not started)
• Low Battery indication in software.
• Comprehensive Alert indicator configuration.
• Alert indicator – indicates if readings are outside of preset limits
• OK indicator indicates if still recording and if readings within configured limits
• Inspection mark in log by push button
• Push Button Logging start with optional delayed start or specific Time & Date start
• Rapid Download! Takes only seconds to download recordings
• High performance at low cost
• Credit card sized case – thin enough to be easily mailed “letter rate”.
• Real time clock records time & temperature simultaneously
• Easy to use LogTag Analyzer software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to formats compatible with other applications such as MS Excel
• Re-calibration to achieve higher accuracy possible
• High quality gold plated remote sensor connector
• Interchangeable Remote Probes – LogTag remote temperature probes are interchangeable provided they are changed with LogTag ST100 type remote temperature sensors.
|
|
Note:
1. Resolution & Accuracy are rated values - actual product performance may be substantially better than figures stated.
2. LogTag ST100 remote proves are designed and calibrated for interchangeability with TREX loggers to the standard rated accuracy of the product. If a TREX/ST100 probe combination is calibrated to a higher level of accuracy (as is possible) then care should be taken to always use the same TREX/ST100 combination for measurements as the ST100 sensor is not rated interchangeable at accuracies better than the TREX/ST100 rating in this specification.
|
