Data Loggers

 

Product Datasheet

Quick Start Guide

Software

TREL-8

-80 ~ +40°C  (-112°F ~ +104°F)

-30 ~ +70°C  (-22°F ~ 158°F)

< than 0.1°C for -80°C ~ 0.0°C
< than 0.2°C for 0.0°C ~+20°C
 < 0.5°C for +20°C ~+40°C (see below)

With recorder case sitting in environmental temperature between 0°C ~ 50°C
Better than ±1°C for -30°C~ +20°C
better than ±1.2°C for -45°C~ -30°C & +20°C~+40°C
better than ±1.7°C  for -80°C~-45°C

8032 readings (16K bytes memory)

adjustable, 30 sec to several hours

Flashing 'OK' indicator flashing 'Alert' indicator.

Typically with full memory (8000 readings) in less than 5 secs depending on computer or readout device used.

IP61

3V Lithium battery

2 ~ 3 years of normal use (based on 15 minute logging, download data monthly.

86mm(H)x54.5mm(W)x8.6mm(T)

35g

Polycarbonate

Standard: 50cm (19””) (Part# ST10S-05)
Extended: 3 m (9’10”)  (Part# ST10S-30)

PTFE/FEP (FDA food contact rated) coaxial

• Logging start by push button or specific date/time start
• Optional clearing of alert indication by push button (places inspection make at same time).
• Download inspection mark recorded in LogTag memory every time LogTag is downloaded.
• 'Prestart' fail-safe logging (records temperature data even if not started)
• Low Battery indication in software.
• Comprehensive Alert indicator configuration.
• Re-calibration to achieve higher accuracy possible
• OK indicator indicates if still recording and if readings within configured limits
• Inspection mark in log by push button
• Push Button Logging start with optional delayed start or specific Time & Date start
• Rapid Download! Takes only seconds to download recordings
• High performance at low cost
• Credit card sized case – thin enough to be easily mailed “letter rate”.
• Real time clock records time & temperature simultaneously
• Easy to use LogTag Analyzer software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to formats compatible with other applications such as Excel
• High quality gold plated remote sensor connector
• Interchangeable Remote Probes – LogTag remote temperature probes are interchangeable provided they are changed with LogTag ST10 type remote temperature sensors.

Note:

1. Resolution & Accuracy are rated values - actual product performance may be substantially better than figures stated.
2 .LogTag TREL-8 is designed to only operate with LogTag ST10 type remote temperature probes. ST10 types are identified by the green sleeve colour on the sensor’s plug.
3. LogTag ST10 remote temperature probes are designed and calibrated for interchangeability with TREL recorders to the standard ex-factory rated accuracy above. If a TREL/ST10 remote probe combination is calibrated to a higher level of accuracy (as is possible) then care should be taken to always use the same TREL/ST10 combination for measurements as the ST10 sensor is not rated interchangeable at accuracies better than the TREL/ST10  rating in this specification.

Tested and complies with EC EMC directives (EN 50081-1:1992 & EN 61000-6-1:2001)
see LogTag TREL-8 CE mark EMC declaration of conformance

Tested and complies FCC Part 15 Subparts A and B.
see LogTag TREL-8 FCC EMC declaration of conformance

Designed for FDA CFR21 Part 11 Digital signatures