TandD RVR-52 - Radio - Voltage/Pulse/Event Datalogger

Shopping Cart

Your cart is empty.

0Items in cart:
£0.00Total:

View Cart

Select Currency

Dataloggers by parameter

Dataloggers by interface

Datalogger Accessories

Saturday 17 May

Location: /TANDD/RTR-5 Wireless Series

TandD RVR-52 - Radio - Voltage/Pulse/Event Datalogger

Product Information

Display and collect voltage or pulse data using the wireless TandD RVR-52 datalogger

The TandD RTR-57C also allows you to control all recording settings such as start recording and other functions of the dataloggers via wireless communication. Moreover, the RTR-5 Series loggers can transmit measurements in the wide range of -30°C to 80°C from distances of up to 100 meters if unobstructed and direct. It is also possible to use in combination with our RVR-52 Wireless Voltage Datalogger.

The lightweight yet durable water resistant construction allows you to use this unit under the harshest of conditions. It can be reliably used in high condensation areas, refrigerated and frozen environments as well as underground.

Because wireless communication for all RTR-51,52,53 and RVR-52 units can be made within the wide range of -30 to 80°C, it is possible to use the units to manage temperature in below freezing conditions such as frozen transportation and storage.

Our RTR-5 Series allows you to wirelessly monitor current readings of one group of RTR-5 Series units, with the readings being sequentially displayed on the handheld RTR-57C Unit.

Monitoring intervals can be set on the RTR-57C for 15 and 30 seconds as well as from 1 minute to 60 minutes for up to 64 units in one group. The high-speed communication allows you to collect 64 units worth of data in just 20 seconds. Moreover, the downloaded data is sequentially displayed on the handheld unit for 2 seconds. At the same time, if a set upper or lower limit has been exceeded a warning will be displayed and an alarm sounded

RVR-52

1.Antenna
2.LCD Display
3.Optical Port
4.Back Case
5.Connector
6.Clip
7.Large Capacity Battery

	RVR-52
Measurement Channel	1Voltage Channel 1Pulse Channel 1Event Channel
Internal Temp. Sensor	-
External Temp. Sensor	-
External Humidity Sensor	-
Input Voltage Range	Vo: 0 to 6.5V Pu: 0 to 30V Ev: 0 to 30V
Measurement Display Resolution	Vo: 1mV Ev: 1sec
Measurement Accuracy	±0.5%+5dgt (at 0 to 40)
Detection Voltage	Lo: below 0.6V / Hi: above 2V
Response Time	Pu:30Hz / Approx.15msec or more (over 2.5V) Ev: 1 sec.
Response Polarity	Pu: select Lo-Hi or Hi-Lo Ev: Both Lo -Hi and Hi-Lo
Highest No. of Counts	Pu: 32,000Counts
Input Impedance	Vo: Approx, 1M Pu, Ev: Pull-up Resistor Approx.100k
Recording Interval	1,2,5,10,15,20,30 seconds / 1,2,5,10,15,20,30,60 minutes Total of 15 choices (Excluding Event data)
Recording Capacity	Vo.Pu./16,000 Readings x 1 Channel Ev./ 8,000 Readings x 1 Channnel
Recording Mode	Endless (Overwrite oldest data when capacity is full) / One-time (Stop recording when capacity is full)
LCD Display Items	Current Readings / Recording Settings / Battery Life Warning / Over Measurement Range Warning / Amount of Recorded Data
Power	Lithium Battery (LS14250(SAFT)) x 1 or AC Adaptor (sold separately) *1
Battery Life *2	Approximately 6 months
Wireless Method	ETSI EN 300-220
Transmission Distance	H62mm x W 47mm x D19mm (excluding protrusions / antenna length 20mm)
Interface	Wireless Communication (RTR-57C) / Optical Communication (RTR-57C, TR-57C, TR-50C)
Communication Speed	When downloading data (Wireless) about 2,000 readings per minute [Collection of a full unit of data= about 420 seconds (optical communication= about 160 seconds)]
Water Resistance *3	IP64 (rated for use in daily life)
Standard Sensor / Input Cable	RVR-7101 (length: Approx. 1.5m) x 1
Unit Temp. Resistance	-40 to 80°C
1 Battery life depends on measurement environment, recording interval and battery performance. 2 Battery life depends on measurement environment, recording interval and battery performance. *3 Water protection is rated as splashproof (IP64) when the sensor is connected. Not for continued immersion